This repair kit is for use on our Baldor motors with the following model numbers:
The repair kit replaces the commonly stripped gear in the motor.
File burs off of output shaft until no bumps or burs remain.
Remove the 4 bolts from the access plate which is opposite of the shaft.
Remove the access plate and be aware of the washer stuck to the plate.
Remove shaft and gear assembly and be aware of the washers on the shaft.
Remove snap ring from old shaft to install on new shaft.
Remove washers from old assembly and install on new assembly.
Change grease or remove any pieces lost from old gear.
Install gear shaft and fill gear box half full of lithium grease (Mobilith SHC007 worm gear lube).
Re-install access plate.